Soil moisture sensors have been widely used in water-saving agricultural irrigation, greenhouses, flowers and vegetables, grassland pastures, soil speed measurement, plant cultivation, scientific experiments and other fields, and probes are an important part of soil moisture sensors. The probe of the soil moisture sensor is the part that is in direct contact with the measured medium and undertakes the important task of “collecting data”. The soil moisture sensor measures the volumetric water content of the soil within the 200cm copper beam range around it. The probe of the soil moisture sensor is made of 316 stainless steel, which can be used in soil for a long time. Soil moisture sensor should pay attention to the probe during use: 1. The soil moisture sensor will be inserted in all (including the sensor tail). The probe of each soil moisture sensor has been sharpened, be sure to pay attention to safety! 2. The soil moisture sensor is inserted into the measured soil 90 degrees vertically, please do not shake the soil moisture sensor when inserting, to prevent the probe from being bent and damaging the probe. 3. The soil moisture sensor probe cannot be inserted into the hard soil block to prevent the probe from being damaged. 4. After the soil moisture sensor is used, use a brush to sweep the dirt on the probe, and dry the probe with a soft cloth to protect the probe from cleanliness and increase the service life. Product consultation, product customization, agent, technical inquiry, quotation, etc. If you have any questions, please contact Xingyi: 400-600-4496!