First, the installation position of the temperature transmitter Temperature transmitter Horizontal or side pipe installation, insertion depth at least half of the pipe diameter, at least 1cm below the protective tube need to be in the measured medium to ensure measurement accuracy. Temperature transmitter bend installation, should make the protection tube and vertical bend axis consistent reverse contact medium, probe insertion depth is at least half of the pipe diameter, at least 1cm below the protective tube need to be in the measured medium to ensure measurement accuracy. The temperature transmitter container is mounted on top and the protective tube needs to be inserted deep enough to avoid errors caused by temperature delamination. It is important to note here: the measuring medium must be partially compatible with the contact part of the temperature transmitter. Second, the temperature transmitter installation and connection mode 1. Threaded connection; The threaded connector fixing method is generally suitable for installation on pipelines without corrosive media. These temperature transmitters have the advantage of small size and compact installation. 2. Flange fixation. Flange fixing method, suitable for installation on equipment. In high temperature, highly corrosive medium, coking slurry medium, highly toxic medium, powder medium and multi-point temperature of the catalyst layer, the flange fixing method should also be used to facilitate the maintenance of the temperature transmitter. For any questions such as product consultation, product customization, agent, technical inquiry, quotation, etc., please contact Xingyi hotline: 400-600-4496!