Humidity and temperature transmitters are suitable for indoor, outdoor and pipeline temperature and humidity measurements. The installation methods of temperature and humidity transmitters corresponding to different measurement environments are also different, and today we will learn about the different installation methods of temperature and humidity transmitters with you. Wall mounting of temperature and humidity transmitters: For temperature and humidity transmitters suitable for indoor environment measurement, the main method is wall-mounted. Wall-mounted humidity and temperature transmitters have mounting holes on the side or back panel, which can be fixed to the wall with the standard expansion screws and screws. The installation of wall-mounted temperature and humidity transmitters requires attention to the selection of installation location. The temperature and humidity transmitter needs to be installed in an area where it is easy to transfer heat and will directly cause a temperature difference with the area to be measured, and the installation height is generally the height of the human body or the environmental area where the main requirement is to measure. Insertion and installation of temperature and humidity transmitters: In some pipes or tanks, it is also necessary to measure the temperature and humidity inside, which requires a plug-in installation of temperature and humidity transmitters. Under normal circumstances, we can not wake up and disassemble the temperature and humidity transmitter without authorization, so as not to cause damage to the product, so the plug-in temperature and humidity transmitter must be away from high-power interference equipment and high-voltage, and places with serious electromagnetic interference at the beginning of installation. Outdoor installation of temperature and humidity transmitters: In addition to measuring the indoor environment, the temperature and humidity transmitter can also measure the outdoor environment. Outdoor measurement of the temperature and humidity transmitter has a mounting plate on the bottom of the side, which can be screwed to the bracket. It should be noted that the installation of temperature and humidity transmitters must be of pure quality to avoid dew or rainwater backflow due to inclination. DIN rail mounting of humidity and temperature transmitters: Due to the requirements of special working conditions, some temperature and humidity transmitters are equipped with a rail mounting plate on the back, and the temperature and humidity transmitter can slide directly into the DIN rail by removing the mounting plate. Humidity and temperature transmitters The DIN rail used is a German industrial standard. The temperature and humidity transmitter is stuck on the guide rail without screws, and the maintenance is also very convenient, with the advantages of small size, installed, and easy-to-rent network.

If you have any questions about product consultation, product customization, agency, technical inquiry, quotation, etc., please contact Xingyi, 400-600-4496!