With the rise and rapid development of the Internet, the central computer room has become an important place for some companies and related institutions to store, process and share, and it is very important for enterprises to ensure the normal operation of servers or processors in the computer room. The ambient temperature and humidity will directly affect its working condition, so the temperature and humidity transmitter has become an indispensable part of the comprehensive monitoring system of the computer room environment. Modern electronic computing equipment uses a large number of various semiconductor devices, which will heat up and heat up under long-term working conditions, and when the temperature rises, the performance of each device will decrease. Affect the normal operation of the device. The ambient temperature is detected by the temperature and humidity transmitter, and the cooling measures in the computer room are activated when the temperature is too high to ensure that the ambient temperature is normal. The humidity in the machine room also needs to be kept within the right range. Because if the relative humidity of the air is too low, that is, when the air is too dry, the static voltage will rise, seriously endangering the safety of equipment and personnel; When the air humidity is too high, the water vapor in the air is easy to form a water film on the surface of the circuit, causing the circuit and arcing phenomenon. Temperature and humidity transmitters should pay attention to the following points during installation and use: First, the temperature and humidity transmitter should avoid installation in the area where heat transfer is easy and will directly cause a temperature difference with the area to be measured, otherwise it will cause inaccurate temperature and humidity measurement. Second, the temperature and humidity transmitter should avoid direct light, away from the window and air conditioning, heating and other equipment, and avoid facing the window and door. Third, if the temperature and humidity transmitter filter is made of metal, it can be disassembled after 2~3 months of use, and the filter screen can be cleaned to make the measurement environment flow normally. Product consultation, product customization, agent, technical inquiry, quotation, etc. If you have any questions, please contact Xingyi: 400-600-4496!